SL-089
Battery Operated
Soldering Iron
This portable soldering
iron is operated by means of 3x1.5V size AA batteries.
Safety Notes
1. place the protective cover over
the tip when storing such that the cover secures the slide
switch in the "OFF" position.
2. Tip is hot, Do not touch, Do not immerse in water
3. After using the soldering iron, cool the iron naturally
before storing away.
4. Always switch off the soldering iron after use by sliding
the switch to the "OFF" position
Safety Notes
1. Slide the battery cover open
at the end of the soldering iron.
2. Place 3x1.5V size AA alkaline batteries into the iron as
illustrated and replace cover.
3. Remove the protective cover at the tip
4. Make sure tip is securely installed
5. Slide the On/Off switch to the "ON" position
6. Hold the soldering iron like a pen
7. Press the round button on top of the On/Of switch continuously
for approx. 15 seconds
8. The tip should reach working temperature
9. To save power, only press button when actually soldering
10. The hot soldering iron should be placed standing upright
with the tip pointing up when
not in use to avoid contacting the surrounding
11. After soldering , slide the switch to the "OFF"
position, replace the protective cover
1. If it takes more than 30 seconds
to reach working temperature, replace the batteries
2. Use alkaline batteries for best results. Do not mix old and
new batteries.
3. With 3 new batteries, this soldering iron can operate continuously
for approx. 60
minutes.
4. Do not change the soldering tip when hot, Use the tip exchanger
provided to remove
the tip as shown
5. the soldering tip is iron-plated long life tip an therefore
do not file the tip.
6. If the soldering iron is not to be used for a long period
of time, remove the batteries
from the soldering iron.
