|
Battery Operated Soldering Iron
- This portable soldering iron is operated by means of 3x1.5V size AA batteries.
Safety Notes
- Place the protective cover over the tip when storing such that the cover secures the slide switch in the "OFF" position.
- Tip is hot, Do not touch, Do not immerse in water
- After using the soldering iron, cool the iron naturally before storing away.
- Always switch off the soldering iron after use by sliding the switch to the "OFF" position
Safety Notes
- Slide the battery cover open at the end of the soldering iron.
- Place 3x1.5V size AA alkaline batteries into the iron as illustrated and replace cover.
- Remove the protective cover at the tip
- Make sure tip is securely installed
- Slide the On/Off switch to the "ON" position
- Hold the soldering iron like a pen
- Press the round button on top of the On/Of switch continuously for approx. 15 seconds
- The tip should reach working temperature
- To save power, only press button when actually soldering
- The hot soldering iron should be placed standing upright with the tip pointing up when not in use to avoid contacting the surrounding
- After soldering , slide the switch to the "OFF" position, replace the protective cover
Maintenance
- If it takes more than 30 seconds to reach working temperature, replace the batteries
- Use alkaline batteries for best results. Do not mix old and new batteries.
- With 3 new batteries, this soldering iron can operate continuously for approx. 60 minutes.
- Do not change the soldering tip when hot, Use the tip exchanger provided to remove the tip as shown
- the soldering tip is iron-plated long life tip an therefore do not file the tip.
- If the soldering iron is not to be used for a long period of time, remove the batteries from the soldering iron.
|
